RaspberryPi B+ WiringPi 引脚对应图
浏览数：51 /
时间：2015年06月09日
Pin Numbering - Raspberry Pi Model B+
Numbering Scheme
Pi4J uses an abstract pin numbering scheme to help insulate software from hardware changes.
P14J implements the same pin number scheme as the Wiring Pi project. More information about the WiringPi pin number scheme can be found here:http://wiringpi.com/pins/
Pi4J provides a RaspiPin enumeration that is used to manage the accessible GPIO pins.
Expansion Header
The Raspberry Pi Model B+ board contains a single 40-pin expansion header labeled as ‘J8‘ providing access to 26 GPIO pins.
(Pins 1, 2, 39 & 40 are also labeled below.)
J8 Pinout (40-pin Header)
The diagram below illustrates the GPIO pinout using the Pi4J/WiringPi GPIO numbering scheme.
Additional Resources
- Please visit the usage page for additional details on how to control these pins using Pi4J.
- Click here for more information on the J8 header.
- Click here for more information the Raspberry Pi pin functions.
郑重声明：本站内容如果来自互联网及其他传播媒体，其版权均属原媒体及文章作者所有。转载目的在于传递更多信息及用于网络分享，并不代表本站赞同其观点和对其真实性负责，也不构成任何其他建议。
