Android耗电量测试
arm工程uboot中的开始段start.s编译报错，提示
问题就是说：
在ARM上编程，但凡涉及到调用，就需要遵循一套规约AAPCS:《Procedure Call Standard for the ARM Architecture》。这套规约里面对栈使用的约定如下：
5.2.1.1
Universal stack constraints
At all times the following basic constraints must hold:
Stack-limit < SP <= stack-base. The stack pointer must lie within the extent of the stack.
SP mod 4 = 0. The stack must at all times be aligned to a word boundary.
A process may only access (for reading or writing) the closed interval of the entire stack delimited by [SP, stack-base – 1] (where SP is the value of register r13).
Note
This implies that instructions of the following form can fail to satisfy the stack discipline constraints, even when reg points within the extent of the stack.
ldmxx reg, {..., sp, ...} // reg != sp
If execution of the instruction is interrupted after sp has been loaded, the stack extent will not be restored, so restarting the instruction might violate the third constraint.
5.2.1.2
Stack constraints at a public interface
The stack must also conform to the following constraint at a public interface:
SP mod 8 = 0. The stack must be double-word aligned.
可以看到，规约规定，栈任何时候都得4字节对齐，在调用入口得8字节对齐。
解决办法在arm的错误问题库中也能够找到
也就是在开头加入一行：PRESERVE8
这样就可以编译通过了
郑重声明：本站内容如果来自互联网及其他传播媒体，其版权均属原媒体及文章作者所有。转载目的在于传递更多信息及用于网络分享，并不代表本站赞同其观点和对其真实性负责，也不构成任何其他建议。
