Enabling Active Directory Authentication for VMWare Server running on Linux《转载》

Enabling Active Directory Authentication

for VMWare Server running on Linux

Version 0.2 - Adam Breidenbaugh - 2007-06-29

Purpose

The purpose of this guide is as follows:

1. Document the steps necessary to enable Active Directory Authentication on a Linux server.
2. Document configuration changes necessary to enable the use of Windows accounts when granting management permissions to Virtual Machines.
3. Demonstrate how to enable Samba File Sharing with Windows Authentication for the purposes of copying Virtual Machines to/from the Linux VMWare Server.

When you are finished with these steps, you will be able to delegate permissions to Windows user accounts to allow Active Directory users the ability to log on to and manage the VMWare Server and its virtual machines.

Disclaimer:

I developed these procedures after countless hours of trial & error, blood, sweat and tears. They are the result of information I‘ve gleaned from searching Samba documentation, Linux howtos, various blogs, vmware forum posts, and dozens of other sources. I know these procedures work, as I am using this setup on all of my production VMWare Servers. If you make even the smallest change, it could break things. Please try to get things working exactly as I have outlined them here before you try changing things.

Also... don‘t try this on a production server (blah blah blah...) There are a number of changes in this document which could cause serious authentication problems on your server if not followed correctly. In addition, I can‘t guarantee that I haven‘t made mistakes in this document. Please, PLEASE don‘t try this procedure for the first time in a production environment...

Software Used

These guidelines assume the use of the following software:

• CentOS Linux 4.4 with Samba packages installed (I personally use a bare bones install from the CentOS Server CD)
• VMWare Server 1.0.x

Furthermore, I will also assume that you have basic system administration skills when it comes to managing CentOS. In other words, you are comfortable with installing packages, editing configuration files, managing services, etc...

In production, I run VMWare Server on CentOS Linux. Most (or all) of the instructions in this guide should apply to other Linux distributions as well, with the main differences being perhaps differing locations for certain configuration files.

Limitations:

The configuration in this guide works well for a simple environment. It has the following limitations:

1. This configuration will only authenticate users from a single Active Directory Domain. If you have multiple Domains in your forest, the Linux Server will only be able to authenticate user accounts in it‘s own domain.
2. This configuration could run into problems in a domain with more than 90,000 user accounts. It could be modified to support more, but 90,000 is far more than the number of users my domain will ever support.

Step 1: Prepare the Linux Server to join the Active Directory Domain

1. Edit /etc/nsswitch.conf

This file controls where the Linux server gets its account, name, protocol and service resolution information. Let‘s look at the some of the lines that control where Linux goes to authenticate the users and passwords:

passwd: files

shadow: files

This tells the Linux server that it will look in its local password file when checking the password a user provides. We need to configure the server to use a Service named "winbind" to authenticate users, but we also want to make sure that the server can still authenticate local users as well, using it‘s local files. To do this we need to change the following lines in the /etc/nsswitch.conf:

passwd: files winbind

shadow: files winbind

group: files winbind

protocols: files winbind

services: files winbind

netgroup: files winbind

automount: files winbind

2. Edit /etc/krb5.conf

This file must be configured properly in order to allow the Linux server to perform Kerberos authentication in the Windows Domain. We will assume that the DNS name of the active directory domain is ‘company.com‘ and that the NetBIOS name is ‘COMPANY‘. Make the following changes:

[libdefaults]

default_realm = COMPANY.COM

dns_lookup_realm = true

dns_lookup_kdc = true

[domain_realm]

company.com = COMPANY.COM

.company.com = COMPANY.COM

Don‘t touch the [realms] section. Specifying dns_lookup_realm = true and dns_lookup_kdc = true under the [libdefaults] section allows the Linux Server to dynamically locate the key distribution service and Kerberos password service using the Active Directory resource records stored in DNS. If you list a specific Domain Controller under the [realms] section, then Active Directory authentication will fail if that server is unavailable, even though other Domain Controllers may still be available.

3. Edit /etc/samba/smb.conf

Replace the contents with the following lines:

[global]

workgroup = COMPANY

netbios name = VMWARESRV01

server string = WMWare Server 01

log file = /var/log/samba/%m.log

max log size = 50

security = ADS

realm = COMPANY.COM

encrypt passwords = yes

server signing = yes

smb passwd file = /etc/samba/smbpasswd

allow trusted domains = no

unix password sync = yes

passwd program = /usr/bin/passwd %u

passwd chat = *New*password* %n\n *Retype*new*password* %n\n*passwd:*all*authentication*tokens*updated*successfully*

pam password change = yes

obey pam restrictions = yes

socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

dns proxy = no

idmap uid = 10000-1000000

idmap gid = 10000-1000000

idmap backend = idmap_rid:COMPANY=10000-1000000

winbind use default domain = yes

winbind separator = +

winbind enum users = yes

winbind enum groups = yes

template shell = /bin/bash

template homedir = /home/%U

[vmware]

comment = VMWare Share

path = /var/lib/vmware

admin users = "COMPANY+VMWare Admins"

valid users = "COMPANY+VMWare Admins"

force group = "COMPANY+VMWare Admins"

public = no

writable = no

create mask = 770

force create mode = 770

force directory mode = 770

The following lines need to be changed, or need special consideration:

[global] Section:

workgroup = COMPANY - Change this to be the NetBIOS name fo your domain

netbios name = VMWARESRV01 - This will be the name of the Linux Server‘s Active Directory computer account

realm = COMPANY.COM - Change to the dns domain name of your Active Directory Domain - in CAPital letters -

idmap uid = 10000-1000000 and idmap gid = 10000-1000000 - These control the range of user id numbers & group id numbers that the Linux server will use for Active Directory users and groups. You will need to change this if your Linux server already has users and groups that have uid and gid numbers in these ranges. Increase the range to accomodate environments with more than 90,000 users or groups.

idmap backend = idmap_rid:COMPANY=10000-1000000 - Make sure you change COMPANY to the NetBIOS name of your Windows Domain. Increase the range to accomodate environments with more than 90,000 users or groups.

allow trusted domains = no and idmap backend - The idmap backend used here ensures that every Linux Server configured this way will generate the same uid and gid for Active Directory users and groups. Without this parameter, uid and gid numbers are assigned to Windows users and groups on a first come first serve basis, and Domain accounts and groups will not have the same uid and gid across different Linux Servers. Unfortunately, the way this is implemented precludes trusted domains from being authenticated, and you must specify the allow trusted domains = no parameter.

winbind separator = + - This tells the Linux Server to use the ‘+‘ symbol to separate the domain name from the user or group name. On Windows, you can specify a domain account in the format ‘DOMAIN\ACCOUNT‘. In Linux, the backslash ( \ ) has special significance, and cannot be used. Because of this, we will need to use the ‘+‘ symbol as the separator, like this: ‘DOMAIN+ACCOUNT‘.

[vmware] Section:

This section defines a Windows file share (named ‘vmware‘) that can be used to easily copy Virtual Machines on to, or off of the Linux Server. I am assuming you have a Windows Domain group created named ‘VMWare Admins‘ to which you will add the user accounts that should be able to administer the VMWare Server installation.

admin users, valid users, and force group - This share definition restricts access to ONLY the ‘VMWare Admins‘ Windows group. Make sure you update the COMPANY+VMWare Admins" lines to match the Domain and group name you are actually using.

writable = no - This makes the share read only, even for admin users. The LAST thing in the world you want is to accidentally delete or corrupt a Virtual Machine‘s files. Remember, Linux has no file locking, and will not stop you from deleting a Virtual Machine‘s files, even while the Virtual Machine is running and accessing them! If you need to copy a Virtual Machine into the share, change this parameter to writable = yes, and then change it back to ‘no‘ when you are done.

4. Edit /etc/pam.d/system-auth

This file globally controls how all (or most) of the services on the Linux Server perform authentication. By editing this file, we are enabling most services and applications on the Linux Server to Authenticate Windows users and groups. Replace the contents with the following lines:

#%PAM-1.0

# This file is auto-generated.

# User changes will be destroyed the next time authconfig is run.

Auth required /lib/security/$ISA/pam_listfile.so item=user sense=allow file=/etc/security/system_operators onerr=fail

auth required /lib/security/$ISA/pam_env.so

auth sufficient /lib/security/$ISA/pam_unix.so likeauth nullok

auth sufficient /lib/security/$ISA/pam_krb5.so use_first_pass

auth sufficient /lib/security/$ISA/pam_winbind.so use_first_pass

auth required /lib/security/$ISA/pam_deny.so

account required /lib/security/$ISA/pam_unix.so

account sufficient /lib/security/$ISA/pam_succeed_if.so uid < 100 quiet

account sufficient /lib/security/$ISA/pam_krb5.so

account sufficient /lib/security/$ISA/pam_winbind.so

password requisite /lib/security/$ISA/pam_cracklib.so retry=3

password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok md5 shadow

password sufficient /lib/security/$ISA/pam_krb5.so use_authtok

password sufficient /lib/security/$ISA/pam_winbind.so use_authtok

password required /lib/security/$ISA/pam_deny.so

session required /lib/security/$ISA/pam_limits.so

session required /lib/security/$ISA/pam_unix.so

session optional /lib/security/$ISA/pam_mkhomedir.so skel=etc/skel/ umask=0022

session optional /lib/security/$ISA/pam_krb5.so

The very first line, (the one that uses the pam_listfile.so library,) allows us to enter a list of users who should have the ability to log on to the local system into the file /etc/security/system_operators. If a user is not listed in this file, they will not be able to log on to the system through ssh, or at the local console.

5. Create and edit /etc/security/system_operators

Set permissions to 0700 on this file to prevent unprivileged users from discovering who has access to the system. In this file, add the users who should be able to logon to the Linux Server, one per line. Make sure you add root! Domain users can be specified in lower case, without the domain name. Here is an example of what the contents should look like:

root

amcmillan

dsanchez

cdonnelly

rkruger

If you wish to disable root logons through ssh, you can do this by setting PermitRootLogin no in /etc/ssh/sshd_config. This way, admins will be forced to login remotely using their unprivileged Windows account, and then su to root to perform system admin tasks.

6. Edit /etc/pam.d/vmware-authd

This file controls how VMWare authenticates users. Because it is not configured to use the global system-auth configuration that we modified above, we will need to make some specific changes to this file to enable Windows Authentication for VMWare. Replace the contents with the following lines:

#%PAM-1.0

auth       sufficient       /lib/security/$ISA/pam_unix.so shadow nullok

auth       sufficient       /lib/security/$ISA/pam_winbind.so use_first_pass

auth       required         /lib/security/$ISA/pam_unix_auth.so shadow nullok

account    sufficient       /lib/security/$ISA/pam_unix.so

account    sufficient       /lib/security/$ISA/pam_winbind.so

account    required         /lib/security/$ISA/pam_unix_acct.so

Note that every time you run /usr/bin/vmware-config.pl (after upgrading VMWare Server, or upgrading the Linux kernel,) this file will be replaced with the default file, and Windows authentication to VMWare will fail. Any time you reconfigure the VMWare Server installation, you must update this file.

Step 2: Configure Services and Join The Domain

1. Configure the winbind Active Directory Authentication account

Winbind is the service that retrieves user and group information from Active Directory. By default, it uses an anonymous connection to retrieve this information. This works fine, if your domain is set to use "Windows 2000 Compatible Permissions".  On a Domain that restricts anonymous connections, Winbind will fail. To prevent this from happening, Winbind must be provided with an account to authenticate as:

·         Create a domain user named ‘winbind‘. Set the account‘s password not to expire. Because the account‘s password will seldom (if ever) be changed, it requires a secure password. (20+ randomly generated characters, using alpha-numeric, upper/lower case, and punctuation marks.)

·         Set the winbind user account on the Linux Server by running the following command:

wbinfo --domain=AINET --set-auth-user=winbind

You will probably see the two following messages, which can be ignored:

could not obtain winbind separator!

could not obtain winbind domain name!

2. Obtain a Kerberos ticket from a Domain Controller

This step will fail if there is a time difference greater than 5 minutes (by default) between the Linux Server and your Windows Domain Controllers. Run the following command to authenticate and obtain the ticket:

        kinit [email protected]

UserID should be a Windows Domain user account that has permissions to create a computer account and add machines to the domain. The DNS Active Directory domain name must be upper case

3. Join the Windows Domain

To join the Linux machine to the domain, run the following command:

        net ads join

This step creates a computer account in Active Directory. Unlike a Windows Server, you won‘t be able to manage the Linux computer with Group Policies, but the computer account is necessary for the Linux Server to participate in Domain authentication.

For some unexplained reason, I frequently see segmentation faults occur during the join process similar to the following:

[2007/05/17 12:34:20, 0] libads/kerberos.c:get_service_ticket(335)

  get_service_ticket: kerberos_kinit_password COMPUTER$@[email protected] failed: Client not found in Kerberos database

Segmentation fault

While it may appear to have failed, it usually works anyway. Next, we‘ll start winbind and test the join to see if the join was successful.

4. Start and test the winbind service

Now that the Linux Server is a member of the domain, we can start the winbind service and verify that it is able to obtain user and group information from Active Directory. Configure winbind for automatic startup and start the service:

chkconfig winbind on

service winbind start

The following commands should return a list of the Active Directory user accounts, and Active directory groups:

wbinfo -u

wbinfo -g

If these commands return users and groups, you are all set. You should be able to log in remotely through ssh, or locally, using any of the users (domain or local) that are listed in the /etc/security/system_operators file. When you log in with a domain user, a home directory should automatically be created for you.

If you get an error, wait a minute and try again. If it‘s still not working, you can reset everything and try joining the domain again using the following procedure:

service winbind stop

net ads leave

kdestroy

rm -rf /var/cache/samba

Now go back to step 1 of this section to try again. In my experience, it works in spite of the errors the vast majority of the time. It can take winbind half a minute or so to begin working after the service starts, so if it doesn‘t work at first, be patient. Once wbinfo starts returning users and groups, you are all set. I‘ve never had any authentication problems once a server has successfully joined. After that, it just works.

5. Start Samba

You might as well start up Samba now:

chkconfig smb on

service smb start

Remember that you won‘t be able to write to the share, until you change the writable = no parameter to a "Yes". Only do this temporarily when you need to copy a Virtual Machine to the VMWare Server. Even though only VMWare Admins have access to the share, it‘s still a huge risk to leave it writeable.

Step 3: Secure the Virtual Machines

The Linux server is now a functioning member of your Active Directory Domain. All that needs to be done now, is to configure appropriate permissions on your virtual machine‘s files to restrict who can access them. This is done by setting the permissions on each Virtual Machine‘s vmx file. Here is a summary of the permissions available:

• R (Read Only) - The user can see that the virtual machine is running, but cannot connect to it‘s console, or do anything else with it.
• RX (Read and Execute) - The user can connect to the console of the Virtual Machine, and is able to change it‘s power state.
• RWX (Read, Write and Execute) - The user can fully manage the Virtual Machine, including changing it‘s configuration and altering it‘s hardware.

We will now configure the file system containing the virtual machines, so that it can support the types of permissions we need to set.

1. Enable ACLs on the filesystem(s) that contain Virtual Machines

POSIX file permissions only allow settings for one user, one group, and everyone else. We need to enable ACL support on the file system containing the virtual machines, so that we can set ACL entries for additional users and groups. In my example, I am mounting a logical volume to /var/lib/vmware. Here is my fstab entry. Modify yours appropriately, adding acl to the options. Note that I also add noatime to increase performance by removing the last access time update that normally occurs every time a file is accessed:

/dev/rootvg/vmwarelv    /var/lib/vmware         ext3    noatime,acl     1 2

The file system needs to be remounted before this takes effect. You can do an online remount, which is particularly handy if you have running virtual machines that you don‘t want to shut down. Use the following command:

mount /var/lib/vmware -o remount,acl,noatime

2. Configure appropriate file system permissions

We want to give root and the Domain group "VMWare Admins" full control over the VMWare file system and all Virtual Machines. To do this, run the following commands:

chmod -R 770 /var/lib/vmware

chown -R root."VMWare Admins" /var/lib/vmware

Now that ACLs are enabled, we can also use setfacl and getfacl to set additional and more granular permissions on your Virtual Machines. Let‘s say that we decide that members of the Help Desk should be able to connect to the Virtual Machines, and reboot them if need be. Create a "Help Desk" group in Active Directory, and give them permissions to connect and change power states to the virtual machines with this command:

setfacl -R -m g:"Help Desk":rx /var/lib/vmware

Now let‘s suppose that the Help Desk group is not allowed to touch domain controllers, but you do want them to be able to see whether or not the Domain Controllers are running. Let‘s say a Domain Controller is running in a Virtual Machine in the folder /var/lib/vmware/machines/FLHQDC03. You would restrict them to read only access like this:

setfacl -R -m g:"Help Desk":r /var/lib/vmware/machines/FLHQDC03

And let‘s give Members of the Developers Active directory group the ability to connect to and operate their SQL Server:

setfacl -R -m g:"Developers":rx /var/lib/vmware/machines/DEVSQL01

You can use getfacl to view permissions on an object like this:

getfacl /var/lib/vmware/machines/FLHQDC03

Check the man pages on setfacl for more information. As you can see, it is possible to set very granular permissions on your Virtual Machines with this method. These file permissions affect what users can do in the VMWare Server Console, and in the MUI Web Management interface. They also affect what users can do with the vmware-cmd command line utility. Remember that in order to allow a user to log on via ssh or onto the Linux Server‘s consoleand use vmware-cmd, you will have to add their Windows or Linux UserID to /etc/security/system_operators.

Conclusion

At work, I use a much more streamlined version of this document. This is my first attempt at fleshing it out into instructions that someone else can use. If you spot errors, or have suggestions, feel free to email them to me here: adam (at) Breidenbaugh (dot) net.

It is possible to perform all of these steps on a server running live Virtual Machines, without shutting anything down. Although I definitely would NOT recommend that, unless you are intimately familiar with the procedure.

A few recommendations for running VMWare Server on CentOS (this could be made into a book):

• Install from the CentOS Server CD, make it a minimal install, and only add what you need with yum.
• Disable all un-necessary services (isdn, pcmcia, portmap, nfslock, rpcifmapd, netfs, autofs, cups, rawdevices, gpm, anacron, atd)
• Use the hugemem kernel for any box with 2GB or more RAM. I‘ve seen docs that say it‘s only needed for machines with 4GB or more, but I‘ve seen oomkiller rear it‘s ugly head on VMWare servers with less than 4GB.
• Set mainMem.useNamedFile = "FALSE" for ALL Virtual Machines. Most of the time, you‘ll notice a definite performance increase.
• Set /tmp & swap file system sizes to 1.5X physical RAM. The VMWare documentation is right about this. Otherwise, you can run into problems with stuck Virtual Machines and other issues.
• Use the iptables firewall to block all incoming traffic except TCP ports 22, 445, 902 and 8333. You may want to limit these connections to the IP Ranges of Administrator workstations for added security. Protecting the VMWare Server host with an iptables firewall will not in any way restrict the network connectivity of Virtual Machines with Bridged NICs.

• 《Rusky copy from:http://adam.breidenbaugh.net/tech/Linux-AD-VMWare-Authentication_Howto.htm》