nagios监控流量脚本

浏览数：28 / 时间：2015年06月11日

需求是我们需要对服务器上的流量进行监控，网络上有个流传的check_traffic.sh，它需要被监控机开启snmp。但是感觉都使用上了nagios还要开snmp。。。有点斧子剪刀一起用的感觉，所以就动手写了个监控流量的shell：

#!/bin/sh

usage() { echo "Usage: $0 [-n <eth0>] [-w <tx rx>] [-c <tx rx>]" 1>&2; exit 1; }

foundw=0;
foundc=0;
foundn=0;

for item in $@ ; do
    if [[ $foundn == 1 ]]; then
        n=$item;
        foundn=2;
        continue;
    fi
    if [[ $foundw == 1 ]]; then
        w1=$item;
        foundw=2;
        continue;
    fi
    if [[ $foundw == 2 ]]; then
        w2=$item;
        foundw=3;
        continue;
    fi
    if [[ $foundc == 1 ]]; then
        c1=$item;
        foundc=2;
        continue;
    fi
    if [[ $foundc == 2 ]]; then
        c2=$item;
        foundc=2;
        continue;
    fi
    if [[ "$item" == "-w" ]]; then
        foundw=1;
        continue;
    fi
    if [[ "$item" == "-c" ]]; then
        foundc=1;
        continue;
    fi
    if [[ "$item" == "-n" ]]; then
        foundn=1;
        continue;
    fi
done

if [ -z "${w1}" ] || [ -z "${w2}" ] || [ -z "${c1}" ] || [ -z "${c2}" ] || [ -z "${n}" ]; then
    usage
fi

R1=`cat /sys/class/net/$n/statistics/rx_bytes`
T1=`cat /sys/class/net/$n/statistics/tx_bytes`
sleep 1
R2=`cat /sys/class/net/$n/statistics/rx_bytes`
T2=`cat /sys/class/net/$n/statistics/tx_bytes`
TBPS=`expr $T2 - $T1`
RBPS=`expr $R2 - $R1`
TMBPS=`expr $TBPS / 1024 / 128`
RMBPS=`expr $RBPS / 1024 / 128`

if [[ $TMBPS -ge $c1 ]] || [[ $RMBPS -ge $c2 ]] ; then
    echo "Critical - current is ${TMBPS}, ${RMBPS}";
    exit 2;
fi
if [[ $TMBPS -ge $w1 ]] || [[ $RMBPS -ge $w2 ]] ; then
    echo "WARNING - current is ${TMBPS}, ${RMBPS}";
    exit 1;
fi
echo "OK - current is ${TMBPS}, ${RMBPS}";
exit 0;