Linux下安装并配置PPTP客户端
声明
作者:昨夜星辰
博客:http://yestreenstars.blog.51cto.com/
本文由本人创作,如需转载,请注明出处,谢谢合作!
目的
在Linux上安装并配置PPTP客户端。
脚本
#!/bin/bash # 脚本作用:交互式自动安装PPTP客户端 # 作者:昨夜星辰 # 创建时间:2015-04-29 # 修改时间:2015-04-29 echo ‘请输入VPN服务器的相关信息:‘ echo ‘(温馨提示:在输入过程中,如果不小心输错了,那么只能通过Ctrl-C终止脚本重新来过了。)‘ while read -p ‘IP:‘ IP do if [ -n "$IP" ] then break fi done while read -p ‘用户名:‘ username do if [ -n "$username" ] then break fi done while read -p ‘密码:‘ password do if [ -n "$password" ] then break fi done echo ‘信息收集完毕!开始安装并配置PPTP客户端!‘ echo -n ‘正在安装主要软件...‘ ( yum -y install ppp pptp pptp-setup cp /usr/share/doc/ppp*/scripts/po{n,ff} /usr/sbin/ chmod u+x /usr/sbin/po{n,ff} ) &> /dev/null && echo ‘完成‘ || exit echo -n ‘正在配置PPTP...‘ ( pptpsetup --create vpn --server $IP --username $username --password $password --encrypt cat > /etc/ppp/options << EOF # Lock the port lock # We don‘t need the tunnel server to authenticate itself noauth # Turn off compression protocols we know won‘t be used nobsdcomp nodeflate # We won‘t do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2 # (you may need to remove these refusals if the server is not using MPPE) refuse-pap refuse-eap refuse-chap refuse-mschap EOF echo ‘#!/bin/bash # chkconfig: 2345 10 90 prog="vpn" start() { if pgrep pppd &> /dev/null then echo "The $prog service has been started." else echo -n "Starting $prog..." pon vpn #sleep 5 #route add -net 0.0.0.0 dev ppp0 while true do route add -net 0.0.0.0 dev ppp0 &> /dev/null if [ "$?" -eq 0 ] then break fi sleep 1 done echo "OK" fi } stop() { if pgrep pppd &> /dev/null then echo -n "Stopping $prog..." poff vpn echo "OK" else echo "The $prog service is not started." fi } status() { if pgrep pppd &> /dev/null then echo "The $prog service is running..." else echo "The $prog service is not running..." fi } case "$1" in start) start ;; stop) stop ;; restart) stop sleep 1 start ;; status) status ;; *) echo "Usage: $0 {start|stop|restart|status}" esac‘ > /etc/init.d/vpn chmod u+x /etc/init.d/vpn ) &> /dev/null && echo ‘完成‘ || exit while read -p ‘是否设置VPN为开机自动启动?(y/n)‘ answer do case "$answer" in y) chkconfig --add vpn break ;; n) break ;; *) esac done echo ‘安装并配置完毕!有关vpn客户端的启动、停止等操作请参考以下提示:‘ /etc/init.d/vpn
参考内容:https://wiki.archlinux.org/index.php/PPTP_VPN_client_setup_with_pptpclient
本文出自 “昨夜星辰” 博客,请务必保留此出处http://yestreenstars.blog.51cto.com/1836303/1640555
郑重声明:本站内容如果来自互联网及其他传播媒体,其版权均属原媒体及文章作者所有。转载目的在于传递更多信息及用于网络分享,并不代表本站赞同其观点和对其真实性负责,也不构成任何其他建议。